Powder Containment Booths

Mycron Air Tech make Powder containment booths are used to control the hazardous emissions of powders, dust or vapors during powder dispensing, product sampling, or bag dispensing, etc., without risk to the operator or environment.The downdraught prevents airborne dusts caused by weighing and dispensing operations rising into the operator’s breathing zone. The air forced downwards is extracted at low level into the booth’s filtration system where dust particles are contained at each level of filtration prior to being re-circulated back into the booths air stream.

1Available Sizes w.r.t Working Area in feet’s (LxBxH)2x2x7 , 3x3x7, 4x4x7, 6x4x7
2Material of ConstructionSS 304/316
3MOC of Working AreaSS 304/317
4HEPA Filter w.r.t Working Area in mm (LxBxH)0.3 µ Mini Plate as per Req.
5Pre Filter10 µ as per Req.
6Motor & BlowerDynamically balanced Motor with Aluminum/PVC Blower
7IlluminationYes, LED
8Power SocketYes, 16A
9Power RequiredSingle Phase 230V/50 Hz
10Total Power Consumption2 – 5KW as per Req.
11Noise level75 db +/- 5 db
12Vibration Level< 2.5 µm (0.000025m)

The Powder Dispensing/ Sampling Booths are designed to give mixed air flow stream for product, operator and environmental protection and used to control the hazardous emissions of dust powder during powder dispensing / sampling process. 0.3 micron downward air stream deflects air-borne dust away from the operator breathing zone which is caused in handling operation.

Dust particle available is being filtered at three levels of filtration prior to being circulated back to the booths air stream. For filling, refilling, weighing & sampling of Raw material & Components.