Powder Containment Booths
Mycron Air Tech make Powder containment booths are used to control the hazardous emissions of powders, dust or vapors during powder dispensing, product sampling, or bag dispensing, etc., without risk to the operator or environment.The downdraught prevents airborne dusts caused by weighing and dispensing operations rising into the operator's breathing zone. The air forced downwards is extracted at low level into the booth's filtration system where dust particles are contained at each level of filtration prior to being re-circulated back into the booths air stream.
The Powder Dispensing/ Sampling Booths are designed to give mixed air flow stream for product, operator and environmental protection and used to control the hazardous emissions of dust powder during powder dispensing / sampling process. 0.3 micron downward air stream deflects air-borne dust away from the operator breathing zone which is caused in handling operation.
Dust particle available is being filtered at three levels of filtration prior to being circulated back to the booths air stream. For filling, refilling, weighing & sampling of Raw material & Components.
|1||Available Sizes w.r.t Working Area in feet’s (LxBxH)||2x2x7 , 3x3x7, 4x4x7, 6x4x7|
|2||Material of Construction||SS 304/316|
|3||MOC of Working Area||SS 304/317|
|4||HEPA Filter w.r.t Working Area in mm (LxBxH)||0.3 µ Mini Plate as per Req.|
|5||Pre Filter||10 µ as per Req.|
|6||Motor & Blower||Dynamically balanced Motor with Aluminum/PVC Blower|
|8||Power Socket||Yes, 16A|
|9||Power Required||Single Phase 230V/50 Hz|
|10||Total Power Consumption||2 – 5KW as per Req.|
|11||Noise level||75 db +/- 5 db|
|12||Vibration Level||< 2.5 µm (0.000025m)|